---
title: "适用于 Brother HL-2270DW 打印机的 macOS 通用驱动程序"
url: "https://reamcp.dev/zh-cn/cases/macos-universal-driver-for-brother-hl-2270dw-printer-d415a8"
source: "https://www.reddit.com/r/MacOS/comments/1xe0aib/macos_universal_driver_for_brother_hl2270dw"
source_type: "reddit"
author: "jmarler"
author_handle: "jmarler"
stars: 0
category: "文件格式与协议"
categories: ["formats-protocols"]
tags: ["apple-silicon", "brother", "cups", "interoperability", "macos", "printer-driver"]
added: "2026-10-25T02:50:58.661Z"
updated: "2026-10-25T02:55:59.526Z"
locale: "zh-cn"
content_locale: "zh-cn"
---

# 适用于 Brother HL-2270DW 打印机的 macOS 通用驱动程序

一名开发者使用 REA（Reverse Engineer Anything）工具包和 Claude 逆向工程了 Brother 已停止支持的 HL-2270DW 打印机驱动程序，并将其重建为已签名、已公证、原生支持 Apple Silicon 的 macOS 通用驱动程序，以 GPL-2 许可证在 GitHub 上发布。

## Description

在 r/MacOS 的一篇帖子中，软件开发人员 jmarler 解释说，Brother 多年前就停止支持 HL-2270DW 打印机，从未发布 Apple Silicon 或通用驱动程序，而 macOS 27 在 CUPS 中放弃 Rosetta 支持后，现有驱动程序也无法使用。通用 PCL 驱动程序因为渲染位图的方式而太慢，所以他使用 Reverse Engineer Anything 工具包（github.com/morluto/rea）和 Claude 重新创建了驱动程序。大约经过两次提示后，他制作出一个 macOS 通用原生驱动程序，实现了官方 Brother 驱动程序的功能，复用了 brlaser 项目中的代码，并以 GPL-2 许可证发布。安装程序已签名并公证，下载和问题跟踪器位于 github.com/jmarler/hl2270dw-macos。这是一个具体例子，说明如何使用 REA 与作者拥有的硬件进行合法互操作，而不是规避保护措施。

## Original README

Brother hasn't supported the HL-2270DW printer for many years now, and never released Apple Silicon (ARM) native or Universal drivers. macOS 27 quietly disabled support for Rosetta with CUPS, the printing subsystem of the printer, and my Brother HL-2270DW printer just stopped working. The macOS native Generic PCL driver is incredibly slow due to how it generates the bitmap, causing it to only be able to load one page at a time. I am a software developer working in Cybersecurity, and had heard of the Reverse Engineer Anything toolkit, so I decided to give it a shot at creating a new driver. It took two prompts, but I managed to build a macOS Universal native driver that implements all of the features of the official Brother Driver. If you have an HL-2270DW printer that you are using from macOS, you can download the driver from my GitHub repo at: https://github.com/jmarler/hl2270dw-macos It uses code from the brlaser project, and it is released under the GPL 2 license. The driver package is notarized and signed, so you shouldn't get any warnings installing it. If that is something you need, I hope it helps you out. If you run into a problem, just open an Issue in GitHub and I'll get it sorted. Full disclosure: This was created using the REA toolkit - https://github.com/morluto/rea - and Claude.   submitted by   /u/jmarler   to   r/MacOS [link]   [comments]